QUICK-RELEASE END LINKS INSTALLATION INSTRUCTIONS

These end links use very small screws and the installation process is delicate. Work over a watch tray, and if needed, take it to a watchmaker.

TOOLS REQUIRED

• 1.0mm screwdriver
• Spring bar tool

INSTALLATION

1. Remove the bracelet from your watch.
2. Remove the original end links.
3. Fit the Steel Reef end links by inserting the spring bar.
4. Insert and tighten the small screw on the other side.

Note: Use tweezers or a small amount of mounting putty/tack to hold the screw.